Lustersheen Products and Lustra - The Briwax alternative

Lustershield is a revolutionary new "surface shine and spray polish" for antique reproduction finishes, especially for usage on hardwoods like Teak, Oak, Mahogany and Walnut where it gives added depth to tired or jaded surfaces, commonly seen in antique and regular furniture showrooms.
Lustershield is an 'all in one' top coat finish for new wood, whether hard or soft.
Lustershield isn't recommended for exterior use, but does work as an excellent alternative to hard paste waxes for all interior wood.

                                *Restores Color
                                *Revives Luster
                                *Beautifies, Preserves and Protects
                                *Quick, and easy to use
                                *Makes the wood feel silky and smooth
                                *Produces a semi-gloss finish on raw timber
                                *Wax shine on finished wood
                                *Contains no silicones
                                *Fresh smell
                                *Cleans and revitalizes

Lustershield Directions for use:
For best results, apply a quick economical squirt, and immediately wipe off all excess with a soft buffing rag / lint free cloth.
Let dry, then buff and burnish. For final buffing and burnishing, excellent results will be achieved using the Lustersheen Polishing pal, in either bronze or steel wool.
On some unfinished woods and substrates, two coats of Lustershield will give a more even finish than one.
For touch ups or to polish chair rungs, table legs, or other small or hard to get to surfaces, spray Lustershield directly on to a cloth, and wipe the surface.
Let dry and follow up by buffing with the Lustersheen Polishing Pal.

Lustershield is far superior to household sprays and other similar products.
Lustershield is a genuine, NATURAL WAX spray.

Lustershield does not contain surfactants, soaps, or silicones.
Lustershield relies on the natural cleaning properties of the high quality selected waxes and natural oils contained in the spray. Lustershield is not only for use as a polish and finish Protectorant shield, but can be used as an alternative finish on all types of timber, skirting, ceiling timbers, stripped and finished interior woodwork and doors etc.

Lustersheen Paint & Varnish Remover is a fast and economical stripping agent for wood or metal surfaces which contains Methelyene Chloride. It is flammable too, but it works, and works well. Its' balanced blend of powerful solvents, in a thick gel, offers a heavy-bodied spray, which removes most finishes such as paint, enamel, varnish, shellac, epoxy, lacquer and acrylic. Lustersheen Paint and Varnish Remover is easier and faster to use than conventional brush-on products and washes away with water.
BE SURE TO READ THE ENTIRE BACK LABEL WELL AND FOLLOW THE DIRECTIONS. USE AND DISPOSE OF PROPERLY.
20 oz Can / 20 oz Net

For wood or metal
Water Soluble
Clings to vertical surfaces

Stripping paint is a messy job. I have tried them all,... the green, the user friendly..., and although worth the effort, stripping paint is an unpleasant messy task. What I have found about Lustersheen stripper is one part of the job is much easier to carry out. That is the application of the stripper, and more often than not, the reapplication, and spot re-applications. Spay your Lustersheen stripper on the finish to be removed, let it set as needed, and then begin the finish removal. The messy task of applying the stripper using Lustersheen Paint and Varnish Remover in spray is significantly easier.

The Polishing Pal is a woven metal wool and synthetic pad 6" x 9". The Polishing Pal is ideal for polishing fine wood finishes and maintaining a polish finish. The Polishing Pal is excellent for polishing any waxed wood surfaces where Briwax or Lustra or any finishing wax has been used. This composite provides for a high quality polishing pad that will last considerably longer; a synergy of high quality polishing materials.